Summit 4G Signal Strength

4G Signal Strength

Check the Signal Strength

Once you have plugged in the Summit 4G device, Summit can login to the device remotely to check the signal strength.
This will give you an idea of the reliability of the 4G service.
The stronger the signal the more reliable the service.

Steps to improve the signal strength

1. Mount the unit externally facing the nearest Telstra Tower.
2. Local the unit near a window facing the nearest Telstra Tower.
3. Whilst on the phone to Summit and checking the signal strength rotate the unit and/or move it different positions in the building especially if the signal strength is weak.

Additional information



Support 

For service difficulties, please contact our Support Team on 1300 049 749 or email support@summitinternet.com.au 

 
For accounts and billing, please contact our Accounts Team on 1300 049 749 or email accounts@summitinternet.com.au

    • Related Articles

    • NBN Fixed Wireless NTD Lights

      Light State Meaning POWER Off No power supply. All other lights will be off if the Connection Box has no power. Red Connection Box is operating on backup battery power and power is low (if a battery has been fitted). Green Connection Box has power. ...

    • NBN Fixed Wireless Setup

      STEP 1 - Locate the nbn™ Fixed Wireless Network Termination Device (WNTD) Find the indoor nbn™ Fixed Wireless Network Termination Device (WNTD) in your premises. The location of this device may vary depending on installation circumstances. Ensure you ...

    • FlexPBX VLAN Configuration

      The FlexPBX standard handset supports the separation of Voice and Data using virtual lans or VLANS.  The advantage of separating the voice and data is the traffic priority can be assigned to the voice traffic ensuring good audio quality. To configure ...

    • Summit 4G Installation and Setup

      Summit 4G Installation and Setup The Summit 4G NTU provides a connect to the Telstra 3G/4G network as a best effort data service. The technology used and the speed will vary depending on the local tower and the installation position of the device. ...

    • Summit 3CX SIP Trunk Configuration

      Summit 3CX SIP Trunk Configuration This article covers the configuration of a Summit SIP trunk on 3CX PBX and the setup of inbound numbers. Requirements You will need to have the following Provided Summit Internet with the IP of your 3CX Instance ...