Factory Reset Yealink W60 / W70 Cordless Base

Factory Reset Yealink W60 / W70 Cordless Base

To factory reset a Yealink W60B/W70B base station, navigate to the base reset option within the system settings on the handset.

Steps to reset using the handset:
  1. Access the menu: Press the OK button on the handset to access the main menu.
  2. Navigate to settings: Use the directional buttons to find and select "Settings".
  3. Enter System Settings: Navigate to "System Settings" and press OK.
  4. Select Base Reset: Find and select the "Base Reset" option.
  5. Enter PIN: Enter the PIN (default is 0000) and press Done.
  6. Confirm Reset: Select "Reset to factory" and confirm with OK.
  7. Wait for Success: The base will reset and display "Success". 
Steps to reset using power on method

For the W60B/W70B, please follow the steps below.


  1. Unplug the power supply.
  2. Long press the Paging button, do not release.
  3. Plug power supply, observe the LED indicator lights until they all light up.
  4. Release the Paging button, restart the base.


For the W80B/W80DM/W90B/W90DM, please follow the steps below.
  1. Plug power supply.
  2. Long press the Device button for 20 seconds or until the LED indicator lights change to a solid yellow light.
  3. Release the button after 10 seconds and the base station will most likely start the reset process (which can take up to a few minutes).